Large Building and School Testing just got easier with the

Air Chek Data Logger.

That's right, by using the data logger you will save time and money. The data logger stores the facility name, building name or number and room designation and automatically records the dates and times using the internal clock.

Just type in the facility name once, followed by the building identification and you're ready to begin. Proceed to the first room and type in the room number or name. Open the kit following the simple instructions and scan the test kit serial number barcode. Just like that you've entered the start date and time. You only need to change the room numbers as you progress with the test placements. Change the building information when you enter another building and you're ready to continue.

When you're done for the day, simply connect a phone line to the modem and dial Air Chek using a pre-programmed toll free number. The data is uploaded to our lab computers. The Air Chek scanner also has an option to download the data to a Personal Computer, which allows the data to be sent to Air Chek using your email program. This has been successful for test locations outside the continental United States.

To end the tests, go back to the test site, close the test kit and scan the barcode a final time. The ending date and time has automatically been recorded. Upload the data again at the end of the day and our computers are ready for your samples. Ship the samples back to our lab. You will receive a building-specific report by fax the day your samples arrive.

Special prices apply. Call us at (800)Air-Chek (247-2435) for a quote today!

This is what the report looks like...

September 8, 1999

For more information send us an email or call (800)247-2435.

Copyright ©1999 Air Chek, Inc. All rights reserved.